Konica Minolta Bizhub C224 / C284 / C364 ITB Transfer Belt Cleaning Blade (A161R71300)
Product Overview Maintain the crisp, high-definition color output of your Konica Minolta Bizhub with our Premium ITB Cleaning Blade. Specifically engineered for the Bizhub C224, C284, and C364 series, this blade is the direct replacement for the cleaning component within the Intermediate Transfer Belt (ITB) assembly (A161R71300).
As the transfer belt rotates, this blade acts as a high-precision wiper, removing residual toner particles after the image has been transferred to the paper. If you are experiencing vertical color streaks, "muddy" backgrounds, or ghosting effects, replacing the ITB cleaning blade is the most effective maintenance step to restore your machine’s color registration.
Key Features:
- Industrial-Grade Polyurethane: Features a high-resilience, multi-layer cleaning edge designed to effectively wipe Simitri® HD toner without scratching the belt surface.
- Exact Fitment: Manufactured to the exact mounting specifications of the A161R71300 frame, ensuring even pressure across the entire width of the belt.
- Extended Belt Life: By keeping the ITB clean of abrasive toner buildup, this blade helps prevent premature surface wear on your expensive transfer belt.
- Cost-Efficient Rebuild: Why replace the entire ITB unit? This blade allows service technicians to rebuild the cleaning section for a fraction of the cost of a new assembly.
Specifications:
- Product: Intermediate Transfer Belt (ITB) Cleaning Blade
- Part Number Reference: A161R71300 / A161R71311 / A161R71300-BLADE
- Compatibility:
- Konica Minolta Bizhub C224 / C224e
- Konica Minolta Bizhub C284 / C284e
- Konica Minolta Bizhub C364 / C364e
- Condition: New (Premium Grade)
Technician’s Maintenance Tip:
The A161R71300 blade sits in a very tight position within the transfer unit. When installing, it is vital to ensure the waste toner transport auger is not clogged. If toner cannot exit the cleaning unit, it will back up and force the blade to "lift," causing immediate cleaning failure.
Pro-Tip: Always "prime" the new blade to prevent it from sticking to the transfer belt. Apply a light dust of Yellow Toner or Kynar Setting Powder to the polyurethane edge. Without this lubrication, the blade can flip or "chatter" during the first few rotations, which can permanently damage the belt's delicate surface coating.
