Konica Minolta Bizhub C220 / C280 / C360 Magenta Developer Refill (200g Pack)
Product Overview Restore the professional color depth of your Konica Minolta MFP with our Premium Magenta Developer Refill. Specifically formulated for the Bizhub C220, C280, and C360 series, this 200g pack provides the exact amount of carrier required to overhaul your DV-311M development unit.
As your machine performs thousands of prints, the developer (magnetic carrier) loses its ability to hold an electrostatic charge, leading to "pale" prints, gray backgrounds, or magenta dust scattering inside the machine. Replacing the developer powder is the most cost-effective way to extend the life of your development unit and maintain high-fidelity color output.
Key Features:
- High-Charge Stability: Optimized magnetic properties ensure the developer maintains a strong "toner-to-carrier" bond, preventing toner leakage and backgrounding.
- OEM-Matched Particle Size: Formulated to match the specific diameter of Konica Minolta Simitri® HD toner, ensuring smooth gradients and sharp text.
- 200g Precision Pack: Pre-measured for a single-unit refill, taking the guesswork out of maintenance and ensuring the correct "Toner Concentration" (TC) ratio.
- Vibrant Color Fidelity: Specifically tuned for the C360 engine to deliver punchy, accurate magenta saturation in both office documents and marketing materials.
Specifications:
- Product: Developer Powder (Carrier)
- Color: Magenta (M)
- Weight: 200g
- Compatibility: * Konica Minolta Bizhub C220
- Konica Minolta Bizhub C280
- Konica Minolta Bizhub C360
- Unit Reference: DV-311M / A0XV0ED
- Condition: New
Technician’s Maintenance Tip:
The Bizhub C220/C280/C360 series uses an "Auto-Refining" system, but the magenta unit often requires a manual developer change if the machine has been sitting idle or using low-quality toner.
Pro-Tip: After pouring the new 200g Magenta Developer into the unit, ensure the mixing augers are clear of any old, clumped powder. Once installed, you must enter the Service Mode and run the "Function > Drum/Developer > Developer Stirring" and then the "TCR Auto Adjustment" for the Magenta channel. This calibrates the machine’s sensors to the new carrier’s specific magnetic permeability.
